Get ready to meet the most versatile portable and ESP32-based Development Council of the moment! It is 100% arduo compatible and it is easy and invisible to wear thanks to its unique thin PCB with 8 x sewing pads. It will also not pierce because the PCB design has no sharp edges. Also 4 of the pads are capacitive touch-enabled.As for versatility, this small development board of 56 x 50 x 7.5 mm (2.2 × 1.97 x 2.95 inch) packs many features like a Hall effect sensor, a temperature sensor and an analogueue pre-amplifier with ultra-low power . The cleanest on-board feature, however, is undoubtedly the ability to connect the board to WiFi and Bluetooth®. Get ideas? Here’s one: Connect the board to the banyddot portable LED collection and let it respond to text or social news, magnets, sounds, time, temperature and more!You can easily connect this portable with a battery thanks to the JST-connection and you do not have to worry about high power consumption, since the board also offers a deep sleep mode to keep the consumption to a minimum when you do not need it. In order to turn off the best things, this thin board is at least 10 times faster than an Arduino UNO due to its super high 240 MHz clock.Check out the Brightdot Wearable LED Boards and get creative!Review the following tutorials:Make a Brightdot tieMake a Brightdot Twinkle BeanieThis text is machine translated.